System-in-Package Power-Management Webinar: Voraussetzungen und Einsatzmöglichkeiten von LTC µModulen

Willkommen in der Welt modularer Lösungen! Linear Technology's µModule  sind komplette System-in-Package (SiP) Power-Management Lösungen mit integriertem DC/DC Controller, Power-Transistoren, Eingangs- und Ausgangs-Kondensatoren, Compensation-Komponenten und Spule in einem kompakten BGA- oder LGA-Gehäuse. Verschaffen Sie sich einen Überblick über die Voraussetzungen und Einsatzmöglichkeiten der µModule. Erhalten Sie in einer Session alle Informationen, um direkt in Ihrer nächsten Entwicklung die Vorteile der LTC µModule zu nutzen.

Webinar-Highlights

  • Einführung in die LTC µModule Familie
  • (Was ist das? Warum setze ich sie ein? Welche Typen gibt es?)
  • Produktfamilie der LTC µModule und Applikationshinweise
  • LTM4644 – Perfekt für leistungshungrige Applikationen in modernen Systemen mit mehreren Spannungskanälen welche aus FPGAs, Prozessoren oder DSPs bestehen können. (LTM4622 und LTM4623 werden auch präsentiert)
  • Demonstration DC1900A Evaluierungsboard
  • Starten Sie gleich ihre nächste Entwicklung mit LTC µModule – Wo erhalten Sie Unterstützung

Sprecher

  • Markus Holtkamp erhielt sein Diplom von der Ruhr-Uni Bochum 1993. Seit Oktober 2010 arbeitet er als Applikationsingenieur bei LTC um Kunden in West und Norddeutschland zu unterstützen. Seine vorherige Berufserfahrung beinhaltet 14 Jahre als IC Entwickler bei der Firma Micram in Bochum und 3.5 Jahre bei der Firma Arrow Electronics als FAE für analoge Produkte.


 


Related


USB Type C solutions

Diodes’ PI5USB30213A USB 3.1 Gen 1 and the PI5USB31213A USB 3.1 Gen 2 USB Type-C™ controllers with configuration channel (CC) logic and 5V VCONN sourcing are the most complete Type C s...

SiC MOSFETs in hard-switched half-bridges

Silicon carbide (SiC) MOSFETs are making major inroads into solar inverters. Engineers are keen to achieve high efficiency across the entire load range. SiC MOSFETs' low on-state resistance and ...

Cooling Options for PET and SPECT Scanners

Thermal management of medical imaging systems is more challenging than ever. Given the complexity of some PET and SPECT systems, the use of a custom designed liquid cooling systems with plug-and-play ...

Active Cooling of Optical Transceivers

The thermal solution for transceiver cooling in an outdoor environment yields an optimal solution to maintain form factor and minimize latency of a remote radio unit. Laird’s ATC line of min...

Performance Optimization of DC Link Systems

This webinar will review the design of the DC Link System using optimized solutions based on integrated capacitor-busbar technology from Rogers Corporation. Due to lower overshoot voltages and les...

Power challenges for IoT and data centers

Martin Hägerdal, Head of Ericsson Power Modules, and Bob Cantrell, the company's Senior Application Engineer, discuss the major drivers of product innovation in digital power modules. The...

Intelligent optimization of power

In this webtalk, Mark Adams, Senior VP at CUI, explains software defined power moving from the board level to its application in data centres or COLO facilities. Software defined power can enable ...

Jump start your Hall-effect sensor expertise

Hall-effect magnetic sensors are an integral part of modern electronics, bridging physical movement to digital information.  This technical dive explores the technology, devices on the market, us...

USB 3.1 Type-C Solutions from TI and WE

The USB-C momentum is growing and quickly being adopted in a variety of end equipment. This new reversible & flippable ecosystem offers new possibilities for how applications will use and deli...

Simple-to-use, small and brushed motor driver

This Webtalk discusses the MAX14871 from Maxim Integrated, the industry’s simplest-to-use, smallest & most flexible brushed motor driver. It is explained why the part was designed - i.e....

Not all regulators are created equal

Power Engineers constantly find themselves making selections among linear regulators, switching regulators and how much integration they need in their systems. However, with the state of the art proce...

Jump start your Hall-effect sensor expertise

Hall-effect magnetic sensors are an integral part of modern electronics, bridging physical movement to digital information.  This technical dive explores the technology, devices on the market...

Need help with your Sigma Delta Signal Chain?

Lifting the lid on Industry Leading Sigma Delta Technology for Industrial Environment. Understand the key trade-offs in performance, power and noise to optimise your signal chain performance and e...


PCAP Touch displays - what does the future hold?

In this article the author compares three different touch technologies and examines their suitability for industrial applications. Figure 1. Example of a touch panel with Force Touch in a medic...

 


Dialog Semi walks through their latest IC solutions for battery chargers

In this video an engineer from Dialog Semiconductor walks us through their latest ICs for battery chargers at APEC 2018. Dialog's Qualcomm Quick Charge adapter solutions offer high efficiency to e...


Steve Allen of pSemi explains their latest LED driver solution

Steve Allen of pSemi explains their latest LED boost product based on Arctic Sand's two-stage architecture. Their PE23300 has a charge-pump, switched-capacitor architecture that offloads most of t...


Teledyne describes their latest 12-bit Wavepro HD oscilloscope

In this video Teledyne LeCroy describes their latest Wavepro HD oscilloscope to Alix Paultre of Power Electronics News at the company's launch event. The WavePro HD high-definition oscilloscope de...


Dialog Semi walks through their latest IC solutions for battery chargers

In this video an engineer from Dialog Semiconductor walks us through their latest ICs for battery chargers at APEC 2018. Dialog's Qualcomm Quick Charge adapter solutions offer high efficiency to e...


ROHM explains their latest wireless battery charger solution kit

In this video an engineer from ROHM goes over their latest wireless power development kit, co-developed with Würth for embedded development. The kit provides a complete wireless power transfer sy...


Tektronix describes their latest mixed-signal oscilloscope

In this video Tektronix explains the features in their latest 5 Series MSO Mixed Signal Oscilloscope. Features include an innovative pinch-swipe-zoom touchscreen user interface, a large high-definitio...


AVX shows a supercapacitor demonstrator at APEC

In this video Eric from AVX explains their supercapacitor demonstrator box at APEC 2018 in San Antonio, Texas. The box shows how a 5V 2.5-farad supercapacitor can quickly charge up using harvested ene...


OnSemi explains their latest passive smart wireless sensor for industrial applications

In this video On Semiconductor explains their latest wireless sensor for hazardous environments at APEC in San Antonio, Texas. Intended for applications like high-voltage power cabinets and other plac...


TI demonstrates an improved gaming power system at Embedded World

In this video Texas Instruments' explains Significant reduction in ripple, which results in improved reliability and increased design margins, among other advantages. Another benefit that improve...


Infineon explains their latest motor drive technology at APEC 2018

In this video Infineon demonstrates new gate drivers using their LS-SOI technology at APEC 2018. In the demo Victorus, an Infineon application engineer, shows in real time how much better thermal the ...


STMicro goes over their latest wireless-enabled microcontroller for the IoT

In this video STMicroelectronics goes over their latest wireless-enabled STM32WB microcontroller for the IoT and intelligent devices in several live connectivity demonstrations at Embedded World 2018....


Infineon explains their latest wireless charging solution at Embedded World

In this video Infineon goes over their latest wireless charging solutions at the Embedded World show in Nuremberg, Germany. The spokesperson explains the difference between their Qi-compatible solutio...


Grammatech talks about the importance of software in engineering

In this video Mark Hermeling of Grammatech talks to Alix Paultre after the Embedded World show in Nuremberg about the importance of software verification for security and safety in electronic design. ...


Lattice Semi walks through their booth demos at Embedded World

In this video Lattice Semiconductor walks us through their booth demonstrations at Embedded World 2018. The live demonstrations include an operating IoT remote vehicle, a low-power network used for vi...


Maxim describes their latest security solution at Embedded World 2018

In this video Scott from Maxim Integrated describes their latest security solution at Embedded World 2018. In the live demo he shows the DS28E38 DeepCover Secure ECDSA Authenticator, an ECDSA public k...


Garz & Fricke at Embedded World 2018 - Embedded HMIs and SBCs “Made in Germany”

You are looking for a HMI-system or single components as touches, displays and ARM-based SBCs? Welcome at Garz & Fricke – the Embedded HMI Company! Our offering ranges from typical single co...


ECRIN Systems myOPALE: Remote Embedded Modular Computers

myOPALE™ offers disruptive technology to multiply capabilities of your next Embedded Computers in a smaller foot print thanks to PCI Express® over Cable interconnect, standard 5.25’&rs...


TechNexion rolls out embedded systems, modules, Android Things kits at Embedded World 2018

In this video John Weber of TechNexion talks to Alix Paultre about how the company helps its customers getting products to market faster. By choosing to work with TechNexion, developers can take advan...


Mike Barr talks cybersecurity

In this video Mike Barr, CEO of the Barr Group, talks to Alix Paultre about cybersecurity at the Embedded World conference in Nuremberg, Germany. Too many designers, even in critical spaces like milit...