Let TI and MathWorks help you launch your next motor control design - in cooperation with Digi-Key

In this webinar, learn how you can quickly design a new motor control system using Embedded Coder® from MathWorks and the C2000™ family of microcontrollers from Texas Instruments. We walk through a demo of Simulink running two three-phase motors simultaneously using the F28069M LaunchPad™ development kit.

TI’s C2000™ MCUs have been focused on easing motor control design for over 20 years. From the older C24x DSP engine to the latest C28x floating-point DSP, C2000 MCUs provide a range of processing performance from 60 MHz to dual-core 200 MHz CPUs as well as analog and control peripherals necessary for premiere control systems. Along with the unique hardware solutions, C2000 MCUs also include the InstaSPIN-FOC™ and InstaSPIN-Motion™ software solutions, which ease three-phase motor design.

MathWorks provides software that enables modeling, simulation, and code generation of control systems using Simulink® and Embedded Coder®. Embedded Coder support for TI’s C2000 family of microcontrollers includes automated build and execution, processor-optimized code including DMC and IQMath libraries, and the ability to perform processor-in-the-loop (PIL) tests with execution profiling.

Speakers

  • Matthew Pate -TI C2000™ MCUs Product Marketing. Matthew has been with Texas Instruments for over 16 years, and the C2000 MCU Business for 13 of those.  Involved in aspects of both HW and SW architecture and validation of the C2000 product lines during his career, Matthew is excited to help customers succeed with C2000 in their system.
  • Brian McKay – Embedded Systems Technical Marketing Manager. Brian McKay manages MathWorks solutions for embedded systems customers featuring TI hardware. Brian has been building customer solutions that combine MathWorks software with embedded hardware for over 10 years.
  • Antonin Ancelle - Embedded Targets Development Manager. Antonin Ancelle leads the embedded targets development at MathWorks for TI hardware platforms and many others. With a decade of experience developing and working with MathWorks tools, Antonin is passionate about sharing his technical knowledge with embedded engineers.


 


Related


Ultra-Low Voltage 8Mb Serial NOR Flash Memory

Winbond’s ultra-low voltage serial NOR Flash memory can work between 1.14V to 1.60V, which covers most of the single AA battery operation voltage range.  The lower Vcc can reduce the power ...

Is the Universal Translator Finally Here?

This webinar from NXP will provide a detailed insight on why these advanced, extremely-low power translators from NXP Logic are the solution for your mixed voltage applications! Today's modern,...

Driving lower power for MCU products even lower

The MSP430 microcontroller family from Texas Instruments prides itself on extremely low power consumption. However, their flagship power consumption is contingent upon various properties like supply...


Module solution for Industrial Ethernet

In this webtalk Renesas introduces a module solution for Industrial Ethernet called intelligent RJ45 (I-RJ45). The Industrial Ethernet module I-RJ45 is available in single and dual port versions i...

Fluffing the Cloud

The synergistic development aspect of electronic design was very apparent these past weeks at the APEC and Embedded World shows, as engineers from around the globe came together in San Antonio, Texas,...

Leading standards in the wireless charging market

Wireless charging is about to become mainstream for many applications. Already today, a lot of wireless charging solutions for smartphones are available - either table chargers or chargers install...

 


Grammatech talks about the importance of software in engineering

In this video Mark Hermeling of Grammatech talks to Alix Paultre after the Embedded World show in Nuremberg about the importance of software verification for security and safety in electronic design. ...


Lattice Semi walks through their booth demos at Embedded World

In this video Lattice Semiconductor walks us through their booth demonstrations at Embedded World 2018. The live demonstrations include an operating IoT remote vehicle, a low-power network used for vi...


Maxim describes their latest security solution at Embedded World 2018

In this video Scott from Maxim Integrated describes their latest security solution at Embedded World 2018. In the live demo he shows the DS28E38 DeepCover Secure ECDSA Authenticator, an ECDSA public k...


Garz & Fricke at Embedded World 2018 - Embedded HMIs and SBCs “Made in Germany”

You are looking for a HMI-system or single components as touches, displays and ARM-based SBCs? Welcome at Garz & Fricke – the Embedded HMI Company! Our offering ranges from typical single co...


ECRIN Systems myOPALE: Remote Embedded Modular Computers

myOPALE™ offers disruptive technology to multiply capabilities of your next Embedded Computers in a smaller foot print thanks to PCI Express® over Cable interconnect, standard 5.25’&rs...


TechNexion rolls out embedded systems, modules, Android Things kits at Embedded World 2018

In this video John Weber of TechNexion talks to Alix Paultre about how the company helps its customers getting products to market faster. By choosing to work with TechNexion, developers can take advan...


Mike Barr talks cybersecurity

In this video Mike Barr, CEO of the Barr Group, talks to Alix Paultre about cybersecurity at the Embedded World conference in Nuremberg, Germany. Too many designers, even in critical spaces like milit...


Ted Marena of Microsemi talks about their scope-free on-chip debug tools

In this video Ted Marena of Microsemi talks about their scope-free on-chip debug tools with Alix Paultre at Embedded World 2018. SmartDebug tool works with the Microsemi FPGA array and SERDES without ...


Infineon demonstrates their iMotion motor control solution at Embedded World

In this video Infineon explains their latest  IMC100 series iMOTION motor control IC at Embedded World 2018 in Nuremberg. The device provides a ready-to-use solution for high-efficiency variable-...


Samsung goes over their new ARTIK IoT development system

In this video James Stansberry of Samsung talks to Alix Paultre about their ARTIK IoT development system at Embedded World in Nuremberg. The family of system-on-modules provide a complete, production-...


Cypress explains their latest low-power 32-bit Arm Cortex-M4 PSoC 6

In this video Allen Hawes of Cypress Semiconductor talks to Alix Paultre about their latest low-power 32-bit Arm Cortex-M4 PSoC 6, designed to provide a secure high-performance MCU for next-generation...