Keys to successful adoption of new low-voltage Flash memory ICs

Today, the circuitry on the board in mainstream industrial and consumer products operates from a wide range of supply voltages: the power rails are most commonly at 5V, 3V, 2.5V, 1.8V and various lower voltages. To ensure compatibility between devices from different manufacturers, and to avoid unnecessarily complicating board-level power system design, merchant semiconductor manufacturers typically design their standard products to run from one or more of these standard power rails. But there is a strong force resisting this general preference for stability and compatibility. It can be summed up in one word: mobility.

So how is the electronics component industry likely to accomplish any move to a lower voltage standard? And how should system designers be preparing now to take advantage of a new generation of lower-voltage component offerings?

By Conrado Canio, William Chen and K. C. Shekar, Winbond.


 


Related


Making your device secure

The internet of things is faced with a major security challenge. Compared to traditional, often unconnected embedded systems, the nature of IoT devices radically increases the risk of attack not just ...

Home Technology — From Connected to Proactive

While Connected Home adoption continues to expand, we are looking ahead to the next phase, developing the technology that will guide the transition to homes that grow more proactive and automated than...

 


Dirk Giesen describes the Parasoft tool suite for Embedded Software Development

Are you responsible for embedded software development in your organization? Your goal should be to create safe, secure, and reliable software. To make sure your device will work properly, deploy Paras...


Ross Sabolik of Silicon Labs talks about advanced Power over Ethernet

In this video Ross Sabolik of Silicon Labs talks about smart  Power over Ethernet systems with Alix Paultre at their APEC exhibit in San ANtonio, Texas. As PoE migrates to higher power levels and...


Dialog Semi walks through their latest IC solutions for battery chargers

In this video an engineer from Dialog Semiconductor walks us through their latest ICs for battery chargers at APEC 2018. Dialog's Qualcomm Quick Charge adapter solutions offer high efficiency to e...


Steve Allen of pSemi explains their latest LED driver solution

Steve Allen of pSemi explains their latest LED boost product based on Arctic Sand's two-stage architecture. Their PE23300 has a charge-pump, switched-capacitor architecture that offloads most of t...


Teledyne describes their latest 12-bit Wavepro HD oscilloscope

In this video Teledyne LeCroy describes their latest Wavepro HD oscilloscope to Alix Paultre of Power Electronics News at the company's launch event. The WavePro HD high-definition oscilloscope de...


Dialog Semi walks through their latest IC solutions for battery chargers

In this video an engineer from Dialog Semiconductor walks us through their latest ICs for battery chargers at APEC 2018. Dialog's Qualcomm Quick Charge adapter solutions offer high efficiency to e...


ROHM explains their latest wireless battery charger solution kit

In this video an engineer from ROHM goes over their latest wireless power development kit, co-developed with Würth for embedded development. The kit provides a complete wireless power transfer sy...


Tektronix describes their latest mixed-signal oscilloscope

In this video Tektronix explains the features in their latest 5 Series MSO Mixed Signal Oscilloscope. Features include an innovative pinch-swipe-zoom touchscreen user interface, a large high-definitio...


AVX shows a supercapacitor demonstrator at APEC

In this video Eric from AVX explains their supercapacitor demonstrator box at APEC 2018 in San Antonio, Texas. The box shows how a 5V 2.5-farad supercapacitor can quickly charge up using harvested ene...


OnSemi explains their latest passive smart wireless sensor for industrial applications

In this video On Semiconductor explains their latest wireless sensor for hazardous environments at APEC in San Antonio, Texas. Intended for applications like high-voltage power cabinets and other plac...


TI demonstrates an improved gaming power system at Embedded World

In this video Texas Instruments' explains Significant reduction in ripple, which results in improved reliability and increased design margins, among other advantages. Another benefit that improve...


Infineon explains their latest motor drive technology at APEC 2018

In this video Infineon demonstrates new gate drivers using their LS-SOI technology at APEC 2018. In the demo Victorus, an Infineon application engineer, shows in real time how much better thermal the ...


STMicro goes over their latest wireless-enabled microcontroller for the IoT

In this video STMicroelectronics goes over their latest wireless-enabled STM32WB microcontroller for the IoT and intelligent devices in several live connectivity demonstrations at Embedded World 2018....